How to Handle Audience Questions at a Conference: Agree the Rules First

Kevin Durham with a full lecture theatre of delegates at an education conference

TL;DR

  • Decide three things with the organiser before the day: whether any questions need filtering, which kinds the chair will stop, and how long each questioner gets.
  • Filter first if the programme touches something some of the room will dislike, such as a merger.
  • A routine talk usually needs no filter, only a short stop list and a stated time.
  • Trade association events carry one extra limit: no pricing or commercial plans from the floor.
  • Write it down and name the person who backs the chair.

How to handle audience questions at a conference comes down to deciding, before anyone speaks, what the room may ask, what the chair will stop and how much time each person gets. Before I take the chair as a conference host, this is the brief I agree with the organiser, and it is the one I would want any association or academic organiser to agree with their chair.

Audience questions at conference Q&A: does anything need filtering?

Audience questions need filtering when the programme touches a subject that part of the room will dislike or that cannot be discussed in public. That is the first thing I get clear on with a client, before anything else about the questions.

My own example is two companies merging: some people in the hall will not like it, and a question about job losses is fair but may not be one the organiser wants live. Ask the organiser plainly: is anything in this programme likely to provoke the room? If yes, take questions on phones into a queue the chair reads first, or collect them before the session. RoomReader, my live Q&A software, has pre-moderation on by default: every question lands in a queue for me to approve, hold or drop.

If the answer is no, an open microphone is fine. Filtering a routine technical talk adds delay and suspicion. The cost of a filter is that the room can tell a question was held, so say how the queue works in the welcome.

Kevin Durham in a selfie with a full daytime lecture theatre of delegates behind a panel table

Which questions can go through, and which must the chair stop?

A chair can let through any on-topic question, however hard, and should stop statements, personal attacks and anything the organiser has ruled out in advance. The second step in my brief is gauging, for the client, which question types fall on which side.

This table is general advice drawn from published chair guidance, not my own rule book:

Type of question Usual call Basis
A clarifying or technical question Let through The purpose of Q&A
A hard challenge to the speaker’s evidence Let through Academic and professional debate
A statement with no question Redirect: “Would you please ask a question?” RGS chair wording
A comment that is biased, demeaning, exclusionary or hostile Interrupt GSA says the chair can and should
A personal attack Interrupt Same GSA list
An off-topic question Intervene politely, move on RSECon26 guidance
Pricing, customers or output plans of competitors Stop (trade associations) CMA, below
A question on the sensitive topic the organiser has ruled out Hold, and say when it will be answered Agreed in the brief

The last row is the one organisers forget, and it is far easier to settle in the brief than in the moment.

The extra limit at a trade association event

At a trade association event, the chair should stop questions that invite members to share competitively sensitive information. The CMA’s trade association guidance, published on 25 September 2014 and read in November 2026, says an association should not be a channel for sharing sensitive information on pricing, customers or output between members.

The same page says members should not discuss such information “in or around association events”, including unofficial meetings and social events. It defines competitively sensitive information as non-public strategic information about a business’s commercial policy, and says historical information is less likely to be sensitive.

The page gives a chair no steps, and I am not a lawyer. My rule, labelled as mine: if a question from the floor asks competitors to reveal what they will charge or produce next year, stop it, and say the organiser will take it up outside the session. Ask the association whether its legal adviser wants to see the question policy.

The words a chair can use to stop a question

The chair should have one short, polite line ready for each kind of stop, agreed in advance, and say it early. Published guidance gives wording worth borrowing:

  • “Would you please come to the point?” and “Please continue this interesting conversation during the break”, from the RGS chair guidance.
  • “Remember, we have a Code of Conduct here” and “You don’t have to answer that”, from the APS chair guidelines.
  • Specific or very difficult questions can wait until after the session, says the GSA.

For a question the organiser has ruled out, I would add: “That is one for the organisers, and they will answer it after the session.” Use them as a starting point; the chair’s own voice matters more.

Say it early. The IAIA tips advise explaining at the start how questions will be handled, so a later interruption applies a rule everyone has already heard.

Who backs the chair when it goes wrong

The organiser should name one person the chair can turn to, and tell the chair they have the authority to stop a question. The APS guidance says chairs “have the authority” to keep questions professional. Several societies name a contact: the NACIS packet says to report inappropriate behaviour to the registration desk or its officers, and RSECon26 tells chairs to alert a volunteer for serious issues and to put comfort and safety before the schedule.

At a virtual session, the Federation for the Humanities and Social Sciences’ 2022 Congress notes make the chair the lead for code of conduct decisions, with a technician ready to mute, disable Q&A or remove someone. That only works if the chair and technician agree it beforehand.

Put the name and phone number in the brief. A chair who has to look for permission mid-session will hesitate.

How much time should each questioner get at conference Q&A?

Each question and its answer should get a fixed share of the Q&A, and the chair should say it. Published slots vary, so work backwards from your own.

Source Talk Questions
RSECon26 12 minutes in a 15-minute slot 3 minutes
RSECon26 25 minutes in a 30-minute slot 5 minutes
SRHE 2013 20 minutes at most in a 30-minute slot 10 minutes

My arithmetic, not a finding: divide the Q&A minutes by the time one exchange takes. Ten minutes at about two minutes an exchange is five questions. Say “five questions” aloud and the room understands the odds.

SRHE calls one question per person a fair rule to announce, and RGS asks chairs to avoid taking several questions from one person. RSECon26 allows the chair to adjust the Q&A length to keep to time; GSA warns against cheating the audience of a break. For slot shares and microphone running, see the Q&A session guide. Announce “two more questions”, then “last question”, as IAIA suggests.

What should the organiser hand the chair before the day?

The organiser should hand the chair five things in writing: the sensitive topics, whether questions are filtered, the stop list, the time per session and the name of the person who backs them. Add them to the speaker brief so the speaker hears the same rules.

  1. Topics that need care, and who decides what is said about them.
  2. Open floor, queue read by the chair, or pre-submitted questions.
  3. The stop list, including any competition-law limit.
  4. Minutes for questions, questions per person and the last-question warning.
  5. The named backer, and whether the session is under the Chatham House Rule.

When is it worth hiring a conference host to chair questions?

A host is worth hiring when a sensitive topic is on the programme, the room is large enough to need a queue, or no one on the committee wants to be the person who stops a colleague. For a single speaker in a small room, a committee member with this table and a stated end time can do it.

A professional chair has done this many times, and the organiser is not the one cutting anyone off. A housing association conference client wrote on my reviews page: “his energy, the structure behind it, his natural enthusiasm has just kept the whole thing rolling along.” The structure is the part this post is about.

One fixed price covers the event, with nothing added later, and RoomReader comes included with hosting. Have ready the programme, the room size, any sensitive topic and your rules for questions. Send the agenda or check availability at hello@conferencehost.uk, or call 07596 851647. A conference MC can chair the questions as well as the day.

17:00Close

Send me your agenda. I’ll show you where the room comes alive.

A fixed price, a free planning call, and a reply within one working day.

No mailing list. Your details go to me and nobody else. Prefer to call? 07596 851647.